Manhole Covers Ireland Ltd
D400 Loading Recessed for Paving
D-400 Critical load 40 t (Carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all typesof road vehicles..)
FRAME
It is obtained from a single cast, its stability is guaranteed through a double throat supporting area, creating a metal to metal coupling thanks to the interposition of an EPDM gasket, this is studied to obtain a watertight/waterproof sealing. Inside there is also a special provision to host, if necessary, the glass reinforced plate (GRP).
COVER
It is square in shape, it ensures a high stability due to the depth of insertion over 50 mm, the
EPDM gasket inserted in the throat, which is located in the supporting area, and the locking
system with stainless steel screws. The opening process is obtained through the insertion of
specific handles in the blind holes of the surface .The filling basin has a height of 70 mm and it can
host any kind of filling material. All the covers are interchangeable.
INTENDED USE
It is designed for footpaths and parking areas for all types of road vehicles (see Norm EN 124
group 4).
TREATMENT
I this manhole cover presents a standard black protective coating .If requested, it can be finished
with a special epoxy painting of black colour in two with a special epoxy painting of black protective coating of 350 microns.
Model Loading Base Clear Opening Overall Frame Recess Height
CRDS40 D400 Square 300 x 300mm 415 x 415mm 70mm 100mm
CRDS55 D400 Square 450 x 450mm 565 x 565mm 70mm 100mm
CRDS70 D400 Square 600 x 600mm 715 x 715mm 70mm 100mm
CRD60120 D400 Square 600 x 1200mm 760 x 1350mm 70mm 100mm
C-250 Critical load 25 t (For gully tops installed in the area of kerbside channels of roads (figure 1) which when measured from the kerb edge, extend a maximum of 0,5m into the carriageway and a maximum of 0,2m into the footway..)
Frame
It is obtained from a single cast, its stability is guaranteed through a double throat supporting area, creating a metal to metal coupling thanks to the interposition of an EPDM gasket, this is studied to obtain a watertight/waterproof
sealing. Inside there is also a special provision to host, if necessary, the glass reinforced plate (GRP).
Cover
It is square in shape, it ensures a high stability due to the depth of insertion over 50 mm, the EPDM gasket inserted in the throat, which is located in the supporting area, and the locking system with stainless steel screws. The opening process is obtained through the insertion of specific handles in the blind holes of the surface
The filling basin has a height of 70 mm and it can host any kind of filling material. All the covers are interchangeable.
Intended use
For manhole covers and gullies for drain wells, installed in water run off areas along the side of pavements. The distance measured from the edge of the pavement extends by 0,5 m in the
carriageway and for a maximum of 0,2 m on the pavement (see norm EN124 group 3).
Treatment
This manhole cover presents a standard black protective coating .If requested, it can be finished with a special epoxy painting of black colour in two protective coating of 350 microns.
Model Loading Base Clear Opening Overall Frame Recess Height
CRCS40 C250 Square 300 x 300mm 415 x 415mm 70mm 100mm
CRCS55 C250 Square 450 x 450mm 565 x 565mm 70mm 100mm
CRCS70 C250 Square 600 x 600mm 715 x 715mm 70mm 100m
CRC60110 C250 Square 450 x 900mm 600 x 1100mm 70mm 100mm
CRC72130 C250 Square 600 x 1200mm 760 x 1350mm 70mm 100mm
CRDS85 D400 Square 750 x 750mm 870 x 870mm 70mm 100mm
This comprehensive range of recessed manhole covers and frames are for use in areas of block paving where it is desirable to have continuity of surface finish and pattern. They are recessed 80mm for use with up to 60mm and 100mm for use with up to 80mm block pavior and galvanised to BS EN ISO 1461. The table below lists the main standard sizes with non standard sizes available on request.
10 Ton GLVW Loading Recessed for Block Paving
MH-RBP-3030-10 10 Ton Square 300 x 300mm 400 x 400mm 95mm 100mm
MH-RBP-3030-8 10 Ton Square 300 x 300mm 400 x 400mm 75mm 80mm
MH-RBP-4545-10 10 Ton Square 450 x 450mm 550 x 550mm 95mm 100mm
MH-RBP-4545-8 10 Ton Square 450 x 450mm 550 x 550mm 75mm 80mm
MH-RBP-6060-10 10 Ton Square 600 x 600mm 700 x 700mm 95mm 100mm
MH-RBP-6060-8 10 Ton Square 600 x 600mm 700 x 700mm 75mm 80mm
Model Loading Base Clear Opening Overall Frame Recess Height
CRDS70 -100 D400 Square 600 x 600mm 752 x 752mm 100mm 120mm
C250 & D400 Grating and Frame
E600 & F900 Cover and Frame
Access Chamber and Pole Boxes
Assist Lift Cover and Frame
Recessed Covers and Frame
Watertight Covers and Frame
Kio Composite Manhole Covers
UTube Slotted Drainage Channel